Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.





Pages: [1]
Author Topic: Machine not working with arduino source
Guest
Newbie
Posts: 7
Permalink
Post Machine not working with arduino source
on: December 24, 2016, 13:26
Quote

Hi guys! All worked well before now. But when I upload "arduino-source" code to my UNO, controller can't work with it. Then I choose serial port controller writes "Polargraph is not connected" status and not sends queye to machine. Then I uploading precompiled version via Hexloader all is ok. But I can't use this version because motor setop need to be changed for my machine.
I already used my edited arduino source and it worked good. Then I used my UNO for another sketch and uploaded polargraph source back and it just not connects to controller.
On screenshot shown processing console there I connect UNO to controller.
How can I resolve this problem?
Thanks forvard for help.
Image

Guest
Newbie
Posts: 7
Permalink
Post Re: Machine not working with arduino source
on: December 25, 2016, 10:54
Quote

Problem resolved by reinstalling Arduino IDE.

sandy
Administrator
Posts: 1408
Permalink
sandy
Post Re: Machine not working with arduino source
on: December 25, 2016, 11:18
Quote

Wha?! I scratched my head at this a bit and couldn't figure it out! As long as it's fixed, who cares how it got there 🙂 merry Christmas!

Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.025 seconds.