Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.





Pages: [1]
Author Topic: Polargraph and L298n
Dima85
Newbie
Posts: 2
Permalink
Post Polargraph and L298n
on: December 19, 2017, 20:37
Quote

Thank you for your work!
I use: https://github.com/euphy/polargraph_server_a1/blob/master/polargraph_server_a1_adafruit_v1.cpp.hex
Previously, I started arduino uno and shield with L293D, everything works fine.
Now I want to try the L298n plug so far only 1 motor, in the application screenshot. The motor hums, hands do not move, but it does not turn. Maybe I'm confused with pins?
The figure shows the order of 2 4 3 5, just tried 2 3 4 5, did not help. What else do I need to configure?
Tell me please.
Sorry for my bad english
Image

Shorn
Beginner
Posts: 42
Permalink
Post Re: Polargraph and L298n
on: December 19, 2017, 21:10
Quote

I believe you have to pull the enable pins high.

Image

Arduino DC Motor Control Tutorial – L298N | PWM | H-Bridge

Hardware:
*Running an Arduino Nano reflashed with an Uno bootloader
*Modified knockoff GRBL CNC shield with knockoff DRV8825 step drivers
*400mA -200 step motors set to 16x microstepping
*2mm belt with 36 tooth drive gears
*Machine set to 1500 Max speed and 5000 motor acceleration

Software:
*Stock Polargraph Controller to make command queues
*D2S version 2
*Send.py on remote Raspberry Pi

Guest
Newbie
Posts: 1
Permalink
Post Re: Polargraph and L298n
on: March 7, 2019, 11:58
Quote

Buy branded shoes online

Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.028 seconds.